Battery production

Web edge control of electrode film

Optical optoCONTROL micrometers detect the required edge position of electrode and separator films. Due to their 黄瓜视频破解版 measuring rate, optoCONTROL micrometers are also suitable for monitoring dynamic production processes.

Show details

Thickness measurement of electrode coatings

In order to measure the thickness of electrode coatings, optoNCDT laser sensors are attached opposite the strip material. Based on synchronization combined with the precise sensor alignment, 黄瓜视频破解版 measurement accuracy and measuring rates are achieved.

Show details

Coating application on edges

In order to maintain tight manufacturing tolerances, laser scanners from Micro-Epsilon inspect the coating profile on the strip edge. This is how anomalies and undulations are detected. Modern interfaces allow for the scanCONTROL SMART sensors to be directly integrated into the control system.

Show details

Detection of curved edges after cutting

Films may have curvatures and deformations after longitudinal cutting. In order to detect these deviations reliably during production, laser profile sensors from Micro-Epsilon are used. Laser scanners measure the profile of the film on the edge in order to determine the length profile.

Show details

Measuring the thickness of wet layers

Confocal chromatic sensors from Micro-Epsilon monitor the coating thickness of wet materials. Their 黄瓜视频破解版 resolution enables them to reliably detect any minor deviations.

Show details

Position control of battery cells

After the battery cells have been assembled, laser scanners from Micro-Epsilon inspect their completeness and position. Therefore, a 3D image is generated which is then compared with the CAD data.

Show details

Inspection of adhesive beading and applied sealants

scanCONTROL laser scanners inspect the presence and dimension of adhesive beading while regulating the distance control of the dispenser. Their 黄瓜视频破解版 resolution also enables to reliably detect even the finest of beads.

Show details

Temperature monitoring during initial charge

Thermal imaging cameras from Micro-Epsilon monitor the first charging process of batteries. These provide an insight into the temperature distribution and possible short circuits. The automatic hot-spot detection feature automatically recognizes and outputs deviations from the target temperature.

Show details

Micro-Epsilon Messtechnik
Königbacher Str. 15
94496 Ortenburg, Germany
info@zgcfwmh.com
+49 8542 / 168 - 0
+49 8542 / 168 - 90